MTSS_1033ND

The MTSS-1033ND accelerometer is designed to measure strong motion, to monitor and analyze industrial vibrations both as a digitizer of seismic system networks and as a standalone instrument.

Three identical compact sensitive elements with an electrodynamic force-balance feedback allow for a wide bandwidth, accuracy and high stability. This model is designed for input signals of up to ±3g and has a self-noise level of 130 ng/√Hz at 10 Hz.

Brochure

Characteristics:

Frequency range	0.1 Hz - 120 Hz
Sensitivity	0.48 V (m/sec2)
Clip level	3 g
Self noise at 1 Hz	-
Dynamic range	126 dB
Sensitivity axes	3 orthogonal
Supply voltage	12 V (5-36 V permissible)
Power consumption	1 W average; 2,5 W peak
Temperature range	-40°C - +55°C
Maximum installation tilt	any
Case connectors	10-pin РС-10ТВ multifunctional connector; SMA-M connector for GPS antenna; SMA-M connector for Wi-Fi antenna; standard USB-B connector for data reading
ADC sampling rate	1, 10, 50, 100, 125, 250, 500, 1000 Hz
ADC resolution	24 bit
Dimensions	150 х 150 х 110 mm
ADC noise performance	22 bits noise-free resolution at 100 sps
Weight	3 kg
Gain coefficients	1, 2, 4, 8, 12
Case material	aluminum
Data recording mode	continuous, schedule
Data recording format	Internal binary, miniSeed, SEG converters provided
Data storage	microSD 32 GB
Data transfer	USB 2.0, Wi-Fi
Inbuilt sensors for device health monitoring	temperature, main supply voltage
Cross-axes sensitivity	-60 dB
Cold-start time	15-30 min
Leveling, mass locking	none required
Delivery set	GPS antenna, Wi-Fi antenna, cables
GNSS receiver	GPS / GLONASS
GNSS timing accuracy	< 1µs